BS1363 Figure 33 Apparatus For Torsion Test On Pins

Parameters:

BS1363 List of references

Figure 33-apparatus for torsion test on pins
Figure 34-test plug
Figure 35-simulated plug and cord devices
Figure 36-apparatus for calibration of turning moment of
simulated plug
Figure 37-turning moment apparatus
Figure 38-solid links for test on fuse clips

Figure1 test pin
Figure 2a)-apparatus for mechanical strength test on resilient covers
Figure 2b)-hardwood block for Figure 2a)
Figure 3-disposition of socket contacts
Figure 4-dimensions and disposition of pins
Figure 5-gauge for adaptor pins
Figure 6-apparatus for testing plug cover fixing screws
Figure 7-mounting plate
Figure 8-plug pin deflection test apparatus for resilient adaptors
Figure 9-apparatus for abrasion test on insulating sleeves of plug pins
Figure 10-apparatus for pressure test at high temperatures
Figure 11-GO gauge for socket-outlet
Figure 12-contact test gauge
Figure 13-test apparatus and circuit for use with contact and non-contact test gauges
Figure 14-non-contact test gauge
Figure 16-withdrawal pull gauges for effectiveness of contact
Figure17a)-Test apparatus for temperature-rise- test
Figure 17b)-dummy front plate for temperature-rise test
Figure 18-apparatus for flexing test
Figure 19-solid link for test on fuse clips
Figure 20--tumbling barrel
Figure 21-pendulum impact test
Figure 23-apparatus for pressure test
Figure 24-apparatus for ball pressure test
Figure 28-calibrated link
Figure 29-calibration jig for calibrated link
Figure 30-test plug for temperature rise
Figure 32-apparatus for tests on adaptor pins

Position a pin on the fixed anyil of the apparatus, as shown in Figure 33, with the wideat aurface in the
horizontal plane. Bring the movable anvil to rest against the upper surface of the pin This quiescent
position shall be taken as the datum point Apply a force to the movable anvll by any conventent method
such that the pin is strained at a rate not exceeding 10 m/min Measure the applied force when the
movement of the anvil from the datum point reache: 1.5 -01 min The test hall be made zeparately on

12.11.4 Adaptor plug pins shall have adequate strength to withstand the stresses of normal use.
12.11.4.1 For solid pins. conformity shall be checked by the following test.

Position a pin on the fixed anyil of the apparatus, as shown in Figure 33, with the wideat aurface in the
horizontal plane. Bring the movable anvil to rest against the upper surface of the pin This quiescent
position shall be taken as the datum point Apply a force to the movable anvll by any conventent method
such that the pin is strained at a rate not exceeding 10 m/min Measure the applied force when the
movement of the anvil from the datum point reache: 1.5 -01 min The test hall be made zeparately on

12.11.4 Adaptor plug pins shall have adequate strength to withstand the stresses of normal use.
12.11.4.1 For solid pins. conformity shall be checked by the following test.

Guangzhou Shice Equipment Co., Ltd. (hereinafter referred to as Guangzhou Shice) is the one professional focus on IEC testing equipments, IP waterproof testing equipments, electronic testing products and other testing products. Guangzhou Shice is professionally dedicated in providing laboratory testing equipment. We are now the high-tech enterprises with technical superiority and R & D capabilities in test instruments industry.

Guangzhou Shice are designed and manufactured as per the requirements of IEC, EN, UL, VDE, BS, AS, ISO standards and etc.

Our main products are:

waterproof and dustproof (IP) environmental test equipment;

switch, plug, socket and coupler test equipment; mechanical strength impact test equipment;

material fire hazard test equipment, enclosure protection test probes;

household appliances safety test equipment;

wire and cable test equipment;

luminaires test equipment;

electric tools test equipment.

Our products are widely used in domestic and worldwide measurement & certification institutions, inspecting mechanism, laboratories, export & import inspection and quarantine bureau, various production companies and etc. Our customer includes Bureau Veritas, CSA, ITS, UL, TUV Rheinland, TUV SUD, SGS and etc.