IPX3 IPX4 Hand Held Spray Nozzle IEC60529 IP Test Equipments

Technical parameters:
1 Water supply Water flow rate is 50～150kpa clean water without inclusion.
2 Spray nozzle parameters
external diameter: Ф102mM
spherical diameter: SФ75.5mm
There is a middle hole and There are 24 holes in the internal circle of holes of which the included angle is 30°.

There are 96 holes in the external circle of holes of which the included angle is 15°. 121 holes in total.
The hole diameter: Ф0.5mm
It is made of brass.
3 Water flow 10L/min±5%,Flow meter is adjustable 4 Range of pressure gauge 0～0.4Mpa 5 Baffle removable 6 Pressure gauge 0~0.25MPa

Conform to:
IEC60529
IEC60598-1
IEC 60335-1
IEC60745-1
VDE0630
VDE0632
IEC60034
DIN40050
ISO20653
IPX3 IPX4 test.

Product information:
The spray nozzle is designed and manufactured in accordance with IEC60529 clause IPX3 and IPX4.
The Spray Nozzle is an alternative to the Oscillating Tube Tester for establishing the degree of protection against ingress of water.
The Spray Nozzle is intended for use on specimens that will not fit within the diameter of the Tube Tester.
The primary IEC tests include IPX3 and IPX4 protection against water spraying and splashing water.
Under this circumstance, the handheld spray nozzle is used by manual.

Instrument:
The SC-IPX34-SN Spray Nozzle is a hand-held test device to verify protection against spraying and splashing water.
The water pressure can be adjusted using the flow control knob on the device to give the required flow rate.
The pressure can be seen on the gauge which is conveniently positioned by the nozzle.
The spray pattern of the nozzle is made to the specifications of IEC 60529.
A moveable shield can be put down over a portion of the nozzle for IPX3 or moved out of the spray pattern for IPX4

NOTE:
The difference between IPX3 and IPX4 is that the baffle should be removed in the IPX4 test.
To let hand-free, we design the bracket for IPX3 IPX4 spray nozzle.
Delivery time: in 2 days.
Factory supply, and fast delivery.

SC-IPX waterproof test machine is according to IEC60529:1989 +A1:1999+A2:2013 (Degrees of protection provided by enclosures (IP
Code)>,IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1.The SC-IPX includes the following test grades: IPX1, IPX2,
IPX3,IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page 51 of IEC60529). It is widely used in the authentication test organization for the
products such as electrical and electronic products, LED luminaires as well as in the relevant quality control department for the
waterproof detection of the enclosures protection grades.

The whole SC-IPX waterproof test system includes:

Drip Box(SC-IPX12): The drip box is for IPX1 and IPX2 drip test. The drip box size is 800x800x75mm(LXWXH). The diameter of drip hole
is 0.4mm. The distance between drip holes is 20mm. The sample can be over 150kg.

Swing Pipe Water Spray Test Equipment (SC-IPX34): It is for IPX3 and IPX4 test. The semi-diameter of swing pipe is 1meter(Any
other size is also available). The inside diameter of the swing pipe is 15mm. The sample rotating table diameter is 1000mm (Or other
size according to the diameter of the swing pipe, and the height is adjustable. The rotation speed is 1-5rpm which controlled by PLC
panel.

Waterproof Jet Test Device (SC-IPX56): With water supply device size is 1000x1000x600m, the nozzle diameter is 6.3mm (IPX5)
and 12.5mm(IPX6). The water speed is 12.5±0.626L/min for IPX5 and 100±5L/min for IPX6.

Immersion tank Waterproof test Device (SC-IPX7): It Is for IPX7 test. The water tank size is 1000x1000x1200mm (Other size can be
designed according to your request). It can test samples up to 120kg

Immersion tank Waterproof test Device(SC-IPX8): It is for IPX8 test. It can simulate a water depth of 0-50m. The water immersion
tank diameter is 600mm and the height is 1200mm. The compressive stress is 10 atmospheres or design according to customer's
request.

Guangzhou Shice Equipment Co., Ltd. (hereinafter referred to as Guangzhou Shice) is the one professional focus on IEC testing equipments, IP waterproof testing equipments, electronic testing products and other testing products. Guangzhou Shice is professionally dedicated in providing laboratory testing equipment. We are now the high-tech enterprises with technical superiority and R & D capabilities in test instruments industry.

Guangzhou Shice are designed and manufactured as per the requirements of IEC, EN, UL, VDE, BS, AS, ISO standards and etc.

Our main products are:

waterproof and dustproof (IP) environmental test equipment;

switch, plug, socket and coupler test equipment; mechanical strength impact test equipment;

material fire hazard test equipment, enclosure protection test probes;

household appliances safety test equipment;

wire and cable test equipment;

luminaires test equipment;

electric tools test equipment.

Our products are widely used in domestic and worldwide measurement & certification institutions, inspecting mechanism, laboratories, export & import inspection and quarantine bureau, various production companies and etc. Our customer includes Bureau Veritas, CSA, ITS, UL, TUV Rheinland, TUV SUD, SGS and etc.